Reveal Helpful Black and Decker Waffle Maker Instructions
Nowadays there are different types of Black and Decker waffle makers on the market. If you own one of them but still do not know how to operate it. Here, KitchenLowCost will give you detailed Black And Decker waffle maker instructions about 4 kinds from this brand to help you run your machine in the best way.
Black and Decker Flip Waffle Maker Instructions
Before using, you should take note of some small details and make some essential preparation. Then we will move to step-by-step instructions to operate this unit.
Black And Decker Flip Waffle Maker uses a short power-supply cord to reduce the risk of being tripped over or becoming entangled.
If a long power-supply cord is used, you need to ensure the following:
- The marked electrical rating of the detachable power-supply cord or extension cord should be at least as great as the electrical rating of the appliance.
- If the appliance is of the grounded type, the extension cord should be a grounding-type 3-wire cord.
- Long cords should be placed neatly on the countertop or table in order that the children will not pull down or stumble.
How to Use Black and Decker Flip Waffle Maker
Step 1: The first step you need to do is to remove all stickers and material packaging. At the same time, you can go to www.prodprotect.com/applica to register your warranty.
After that, you could open the waffle maker by lifting the cool-touch handles up and dusting them off.
To clean the inside, you can use a damp cloth or sponge, and for the outside, use a soft cloth or paper towels. Then you need to find a flat location and enough space to use the machine.
Step 2: For the first use, you can coat a light layer of cooking oil on the surface of plates, then close the waffle maker using cool-touch handles.
When the unit is closed and the red power indicator light is lit, it will start to preheat.
This light remains illuminated until the waffle maker is unplugged. Because the unit is very hot, do not touch any parts of the machine except for cool-touch handles.
Step 3: Wait until the temperature-ready indicator light turns green, then the waffle maker is also ready to bake.
Then you open the unit by using cool-touch handles and pour about a cup (177 ml) into the center of the lower waffle plate. Avoid spilling edges to prevent overflow.
Step 4: Wait about 10 minutes then turn the cool-touch handle to the right clockwise until the waffle maker is upside down. To cook a waffle, it may take you 3-4 minutes.
When the ready indicator light illuminates, it means the baking process is completed. If you want waffles crispier, it may take a little longer.
Note: Do not open the waffle maker during cooking, because it will make your waffles not crispy and also cook poorly.
You need to wait until the green indicator light is illuminated. If the waffle is not fully cooked, it may be split and hard to remove.
Step 5: When cooking is finished, turn the cool-touch handles to the left (counterclockwise). Then you use a tong or spatula to release waffles out of the grids.
Step 6: Unplug the waffle maker and allow it to cool down completely. If you want to make the next waffle, preheat it.
Note: Because grids are very hot, so you need to take note of using cool-touch handles all the time.
Black and Decker Double Flip Waffle Maker Instructions
Similar to a flip waffle maker, nonetheless, it allows you to make two waffles per time.
Important Notes Before Using
This unit is equipped with a polarized plug and used for 120V models only.
It is designed to fit the outlet, if it does not fit, turn it around. And if that way is ineffective, call for a qualified electrician. Do not arbitrarily modify the plug anyway.
It has a tamper-resistant screw to make the outer cover not be removed. To reduce the electric shock, limit removing the outer as much as possible, just in case of repair.
This waffle maker is also provided with a short power-supply cord in order to reduce the risk of being tried over or entangled.
How to Use Black and Decker Double Flip Waffle Maker
Before using it, you should go to www.prodprotect.com/applica to register your warranty.
Then you remove all packages, wash removable parts and choose a location where is enough space for the machine to operate and flow heat without damaging cabinets and walls.
The way this machine works is similar to the flip waffle maker. However, it allows you to bake 2 waffles at the same time.
Step 1: Before use, apply a light coating of cooking oil (vegetable, canola, or corn oil) to the entire surface of the plates. Do the same for the other side.
Step 2: Plug into a standard outlet. When the red indicator light illuminates, it means that the unit starts to preheat.
The red indicator light will remain until the waffle maker is unplugged. When the preheating process is done, the green temperature-ready indicator light will illuminate.
Then you could start using the appliance. It will go on and off to indicate that the temperature is still being maintained.
Step 3: Once the machine is preheated, you unlock the waffle maker by pulling the handle lock to the unlock position.
]Next, lift the cool-touch handles up. Pour about ¾ cup of batter into the center of the lower waffle plate. Lock the handle by pressing the handle lock.
You should wait approximately 10 seconds before turning the handle to make the unit upside down.
Step 4: Wait about 3-4 minutes for the waffle to finish. If you want to make them crispy, you could make them longer. If you want to make the second waffle, do the same for the other side.
Note: Do not open the waffle maker during cooking.
Step 5: When cooking is finished. You flip the waffle maker and release waffles out of the plates. Unplug the unit and wait for it to cool completely before cleaning or storing it.
To make your waffle more delicious and attractive, mix and stir them in:
- Mashed banana, chopped walnuts, macadamia nuts, toasted almonds, or pecans, diced fruit, such as apples, peaches, plums, or berries
- To keep waffles warm, put them onto racks and then into an oven set to 300ºF for up to 10 minutes.
- To reheat them, use your preheated toaster oven and set it to 350º F, for about 5 minutes.
Never use water to clean the waffle maker. To clean plates, use a brush or cotton swabs to remove residues. Then you could use a cotton cloth to clean the surface of the interior and exterior.
Black and Decker Belgian Waffle Maker Instructions
The next type is Belgian waffle maker which could support you to make delicious Belgian waffles for family.
How to Use Black and Decker Belgian Waffle Maker
Step 1: Remove all labels, tags, and stickers attached to the unit. Then open the waffle maker by lifting the handles, and using a brush to dust it off.
Following that, you need to visit the website www.prodprotect.com/applica to register your warranty.
Step 2: For the first use, you should coat a layer of cooking oil on the surface of both plates. Plug the machine into a standard outlet and wait for about 5 minutes for preheating.
Step 3: Pour about 2/3 cup (160 ml) of batter onto the lower cooking surface. You could use a rubber spatula to spread the batter over the edges.
Do not use too much batter per time because you may face overflow and mess.
Step 4: Close the lid but do not force it to shut and wait for about 4-5 minutes for the waffles to be baked.
The ready light will come on. During cooking, you could see slightly radiating sides, this is completely normal. Avoid opening the waffle maker during baking because it will make waffles stick or cook poorly.
Step 5: When the ready light is off, the waffles are ready. You open the waffle maker and release waffles from the plates using tongs or forks.
Be careful in order not to destroy the nonstick coating. If a spot is sticky, pour some oil on it and wait for it to soften.
Step 6: When all waffles are baked, you unplug the unit and wait for it to cool completely before cleaning.
- You do not have to make the light go out and then pour the batter in. When the ready light comes out, it means that the waffle maker is also ready to make the new one.
- You don’t have to make the light go out and then pour the batter in. When the ready light comes out, it means that the waffle maker is also ready to make the new one.
- To preserve the cake for a long time. You just need to cool the waffles, place paper towels between them, wrap waffles in plastic wrap or freezer bags, and freeze.
- It’s nice to use packaged pancake mix or baking mix with this product.
Black and Decker 3 in-1 Waffle Maker Instructions
The last product is integrated with multi-functions and easy to use every day.
Before First Use
You need to remove cooking grids by pressing down on the drifts at the front of the unit and sliding the grids forward and out.
After that, you could put them in the dishwasher or wash them in soapy water. When reinstalling, make sure grids match with the waffle maker before plugging and operating.
Another step you should do is to apply a light layer of cooking oil on the surface of grids for the first use. You do not apply it every time later. Do not use non-stick cooking spray to “condition”.
Using this 3-in-1 machine is similar to using the Belgian waffle maker, which also allows you to bake 4 waffles per time.
Step 1: The first step is to preheat the unit. At that time, the signal light will come on and it may take you about 5-8 minutes for this process.
When you see the signal light comes out, it means that the machine is ready to bake.
Step 2: Pour about 1 cup of batter onto the lower of the waffle maker. You could use a rubber or wooden spatula to spread waffles to the edges of grids.
Next, you adjust the knob to batter and close the lid to bake it. This process will normally take 3-4 minutes depending on recipes and batter brands.
The light will go off and on to indicate the temperature is remaining The hinge is designed to steam exit, so you should not press your hand onto the waffle maker during cooking.
Also, you should not open the waffle maker during baking in order to avoid the cake sticking and softening.
Step 3: When you see the light comes out, it means that waffles are ready. You use a spatula to remove it and remember to avoid creating scratches on the surface of the nonstick surface.
If stick occurs, you could apply a little cooking oil onto that place and wait some minutes for it to soften. If you want to make more, you do not need the waffle maker to cool down but pour batter immediately after that.
Step 4: When cooking is finished, turn the control knob to OFF, unplug and wait for some minutes to make it cool completely before cleaning.
The machine is also designed for grilling. It works well to prepare griddle-style foods such as pancakes, eggs, or bacon strips, or closed grilling for hamburgers, hot dogs, or sandwiches.
Step 1: Make sure that the grids fit perfectly with the flat grill sides. The following step is to plug the unit into a standard outlet.
Step 2: You may want to put a small can or container under grease spouts in order to contain grease or oil drips from the food (bacons or chops).
Step 3: There are two ways to grill food: closed grilling and open grilling.
For Closed Grilling: You may want the food grill in a closed position. It will grill both sides of the food at the same time. Turn the knob to high and preheat the unit for 8-10 minutes.
When the signal light goes out, you open it and put food inside, close the unit and wait for some minutes depending on the different kinds of food you want to grill.
For Open Grilling: For this grill, you’ll open the top gently and slowly until it’s level with the flat of the lower grid. Also, you will wait for the waffle maker to preheat.
Next, you place food on them and turn the food if necessary. If you want to keep food warm, adjust the knob to LOW.
Step 4: When grilling is finished, you turn the knob to OFF. Close it and unplug the cord. Remember to wait for it to be cool before cleaning.
- Please use rubber or wooden tools instead of metal to avoid damaging the nonstick layer.
- To preserve baked waffles. You should put them between paper towels, then wrap them, put them into plastic wrap or freezer bags, and freeze.
- To avoid sticks happening, you could use cooking oil or cooking spray before using.
Black and Decker Waffle Maker Care and Cleaning Instructions
Before cleaning, remember to unplug the cord and let the unit cool completely.
To clean the exterior, you could use a damp cloth or sponge. You can make it a little damp to wipe, but remember to dry it with a soft cloth thoroughly.
When cleaning the interior, you could use a brush to wipe food debris out. Then wipe with a cloth.
Do not use steel wool or other abrasive cleaners on the surfaces because it causes scratches and destroys nonstick coating.
Make sure that the machine is dry before storage.
For machines having removable plates, you should wash them with soapy water or put it into a dishwasher after using them and let them dry before inserting them into the machine.
You should also let cords loosen when storing so as to avoid broken or broken cords.
KitchenLowCost has provided you with specific Black and Decker waffle maker instructions of 4 types. In addition, we also guide you with tips and hints you could take advantage of during use. We hope that you will find this article helpful and let us know by liking, sharing, and commenting below.